PENGARUH PERAWATAN WATER-CURING DENGAN VARIASI LAMA PERAWATAN DAN TINGGI PERENDAMAN TERHADAP KUAT TEKAN BETON

  • Adi T. M. Wila Prodi Teknik Sipil, FST Undana
  • Elia Hunggurami Prodi Teknik Sipil, FST Undana
  • Judi K. Nasjono Prodi Teknik Sipil, FST Undana
Keywords: Beton, Water Curing, Kuat Tekan Beton, Lama Perawatan, Tinggi Perendaman

Abstract

Penelitian ini bertujuan untuk mengetahui pengaruh lama perawatan dan tinggi perendaman terhadap kuat tekan beton. Mutu rencana beton 25 MPa dengan sampel silinder berdiameter 15 cm dan tinggi 30 cm sebanyak 42 sampel. Perendaman dilakukan dengan lama perawatan 0, 7, 14, 21 dan 28 hari, dan tinggi perendaman 0, 1/3 h, 2/3 h dan h. Hasil penelitian menunjukkan kuat tekan beton umur 28 hari dengan tinggi perendaman 1/3 h, 2/3 h dan h berturut-turut untuk perawatan selama 7 hari sebesar 21,13 MPa, 21,88 MPa, 22,45 MPa;selama 14 hari sebesar 21,98 MPa, 22,45 MPa, 23,77 MPa; selama 21 hari sebesar 23,11 MPa, 23,67 MPa, 25,37 MPa; selama 28 hari 24,24 MPa, 25,65 MPa, 27,54 MPa; tanpa perawatan sebesar 19,33 MPa. Perbandingan kuat tekan umur 28 hari dari setiap variasi terhadap kuat tekan yang dirawat selama 28 hari dengan tinggi perendaman hmengalami penurunan. Untuk tinggi perendaman 1/3 h, 2/3 h dan h berturut-turut untuk perawatan selama 7 hari sebesar 23,29 %, 20,55 %, 18,49 %; selama 14 harisebesar 20,21 %, 18,49 %, 13,70 %; selama 21 hari adalah 16,10 %, 14,04 %, 7,88 %; selama 28 hari adalah 11,99 %, 6,85 %, 0 %; tanpa perawatan sebesar 29,79 %.

This research aimed to determine the effect of water curing time and immersion height on the compression strength of concrete. The quality of the concrete plan is 25 MPa with a sample of cylinders with a diameter of 15 cm and a height of 30 cm as many as 42 samples. Immersion was carried out with curing time of 0, 7, 14, 21 and 28 days, and immersion heights of 0, 1/3 h, 2/3 h and h. The results showed that the compression strength of concrete aged 28 days with an immersion height of 1/3 h, 2/3 h and h respectively for curing 7 days was 21,13 MPa, 21,88 MPa, 22,45 MPa; for 14 days of 21,98 MPa, 22,45 MPa, 23,77 MPa; for 21 days of 23,11 MPa, 23,67 MPa, 25,37 MPa; for 28 days 24,24 MPa, 25,65 MPa, 27,54 MPa; without treatment of 19,33 MPa. The comparison of the compression strength at 28 days of each variation to the compression strength treated for 28 days with an immersion height h decreased. For the immersion height of 1/3 h, 2/3 h and h for treatment for 7 days, respectively, 23,29 %, 20,55 %, 18,49 %; for 14 days by 20,21%, 18,49%, 13,70%; for 21 days is 16,10%, 14,04 %, 7,88 %; for 28 days is 11,99 %, 6,85%, 0%; without treatment by 29,79%.

References

Badan Standarisasi Nasional. (2000). SNI 03-2834-2000 Tata Cara Pembuatan Rencana Campuran Beton Normal. BSN, Jakarta.

Badan Standarisasi Nasional. (2004). SNI 15-2049-2004 Semen Portland. BSN, Jakarta.

Mulyono, B., Wariyatno, N.G. (2011). Conference : Seminar Nasional Unsoed. Kajian Metode Perawatan Beton Di Lapangan Secara Eksperimental Dengan Variasi Lama Perawatan Terhadap Kuat Tekan Beton Normal. Puwokerto.

Nursyamsi. (2005). Pengaruh Perawatan Terhadap Daya Tahan Beton, Jurnal Simatrika. 4 (2) : 317-322.

Tjokrodimulyo, K. (2007). Teknologi Beton. Keluarga Mahasiswa Teknik Sipil Universitas Gadjah Mada. Yogyakarta.

Published
2022-11-03
How to Cite
Wila, A. T. M., Hunggurami, E., & Nasjono, J. K. (2022). PENGARUH PERAWATAN WATER-CURING DENGAN VARIASI LAMA PERAWATAN DAN TINGGI PERENDAMAN TERHADAP KUAT TEKAN BETON. Jurnal Teknik Sipil, 11(2), 183-188. Retrieved from https://sipil.ejournal.web.id/index.php/jts/article/view/539

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.