PENGARUH PENAMBAHAN CACAHAN LIMBAH PLASTIK JENIS HIGH DENSITY POLYETHYLENE (HDPE) PADA

  • Dantje A. T. Sina
  • I Made Udiana
  • Bernad D. Da Costa
Keywords: HDPE Plastic, Waste, Flexural Strength Concrete

Abstract

Waste is a very complex problem in urban area. Plastic waste is increasing every year. Kupang with population of 291,794 people generate waste reaches 926 m3/day. Organic waste to 700 m3 and inorganic waste about 226 m3. Concrete is planned by strength quality 25 MPa. Based on the analysis in this study obtained that concrete flexural strength value increased due to the addition of HDPE plastic shredded into the concrete, with chopped levels are added to the concrete at 0%, 0.50% and 0.90% .0,70%. Flexural strength value of normal concrete without the addition of shredded plastic (0%) is 4.12 MPa, flexural strength of concrete with the addition of shredded plastic 0.50% is 4.30 MPa increased 4.37% from normal concrete flexural strength, flexural strength of concrete with the addition of shredded plastics 0.70% is 4.21 MPa increased 2.19% from the normal concrete flexural strength and flexural strength of concrete with the addition of shredded plastic 0.90% is 3.94 MPa decreased 3.64% of flexural strength normal concrete.

Metrics

Metrics Loading ...
Published
2012-09-30
How to Cite
Sina, D. A. T., Udiana, I. M., & Da Costa, B. D. (2012). PENGARUH PENAMBAHAN CACAHAN LIMBAH PLASTIK JENIS HIGH DENSITY POLYETHYLENE (HDPE) PADA. Jurnal Teknik Sipil, 1(4), 47-60. https://doi.org/10.35508/jts.1.4.47-60
Section
Articles

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.