STUDI PENGARUH TANGGA PADA PEMODELAN STRUKTUR BANGUNAN TAKBERATURAN AKIBAT BEBAN GEMPA

  • Rinaldi A. P. Silitonga Prodi Teknik Sipil, FST Undana
  • Partogi H. Simatupang Prodi Teknik Sipil, FST Undana
  • Yunita A. Messah Prodi Teknik Sipil, FST Undana
Keywords: Tangga, Displacement, Model, SAP2000

Abstract

Ketidakberaturan bangunan gedung mempengaruhi beban yang terjadi dan menimbulkan simpangan antar lantai serta titik pusat pembebanannya dapat berubah. Ini yang menyebabkan bangunan gedung bertingkat sering didesain dengan tidak menyertakan tangga pada pemodelannya. Penelitian ini bertujuan untuk mengetahui bagaimana respon struktur bangunan akibat perubahan model tangga, dilakukan analisis struktur dengan software SAP2000, analisis gempa respon spektrum dan analisis struktur (running analysis). Model struktur gedung yang digunakan yaitu gedung berbentuk L dengan tangga L, gedung berbentuk L dengan tangga U, gedung berbentuk U dengan tangga L, serta gedung berbentuk U dengan tangga U. Berdasarkan hasil analisis, dengan penempatan dan variasi bentuk yang berbeda, dapat mempengaruhi kekakuan struktur terhadap beban yang diterima karena tangga sebagai pengekang (brace frame) yang mengakibatkan suatu struktur bangunan gedung menjadi lebih kaku (rigid), hasil analisis keempat model, ternyata struktur lantai dasar menerima gaya dalam momen yang lebih besar dan untuk perpindahan yang terjadi pada tangga U < L terhadap arah memanjang struktur sedangkan perpindahan yang terjadi pada tangga L < U terhadap arah melintang struktur.

The irregularity of the building affects the load that occurs and causes the deviation between floors and the center of the load to change. This is why high rise buildings are often designed not to include stairs in the modeling. This study aims to determine how the response of the building structure due to changes in the staircase model, structural analysis was carried out using SAP2000 software, earthquake response spectrum analysis and structural analysis (running analysis). The building models used are L-shaped buildings with L stairs, L-shaped buildings with U stairs, U-shaped buildings with L stairs, and U-shaped buildings with U stairs. the load received because the ladder is a brace frame which causes a building structure to become more rigid, the results of the analysis of the four models, it turns out that the ground floor structure receives a larger moment force and the displacement that occurs on the U < L stairs towards the direction of the ladder. extending the displacement structure that occurs on the ladder L < U with respect to the transverse direction of the structure.

References

Nasional, B. S. (2019). Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Nongedung. Jakarta: Badan Standarisasi Nasional.

PPIUG. (1983). Peraturan Pembebanan Indonesia untuk Gedung 1983. Bandung: Penerbit Yayasan Lembaga Penyelidikan Masalah Bangunan.

PU, K. (2021). Desain Spektra Indonesia. Diambil dari ://puskim.go.id/Apkasi/desain_spektra_gempa_indonesia_2021/.

Schodek, D. L. (1991). Struktur. Bandung: PT ERESCO BANDUNG.

Published
2023-06-26
How to Cite
Silitonga, R. A. P., Simatupang, P. H., & Messah, Y. A. (2023). STUDI PENGARUH TANGGA PADA PEMODELAN STRUKTUR BANGUNAN TAKBERATURAN AKIBAT BEBAN GEMPA. Jurnal Teknik Sipil, 12(1), 45-58. Retrieved from https://sipil.ejournal.web.id/index.php/jts/article/view/548

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.